160 weight (38mm = 1_1/2″ inch width)
1 1/2" Rubber Duc™ Webbing Beaded Smooth 160 weight
Roll Size: 33 Yds. Model #: W30A-PUPT-RDBE-1500-ZS
Priced as low as... $4.20 Yard
Base Shipping Weight: 0.13 lbs. / Yard
This Special Smooth Beaded 38mm (1_1/2″) version of Rubber Duc ™ Coated Webbing has two thick molded ridges on the edge of the webbing on the front side. These ridges help strengthen the webbing and simulates the rolled edges of fine leather straps.
Constructed of Durable Polyethylene webbing with a breaking strength of 1,000 lbs. completely coated and encased with a smooth glossy finish with molded 'beads' that run the entire length of the webbing on one side. Polymer casing is made from Proprietary Thermoplastic Polyurethane (TPU). Overall thickness of the 160 weight is 0.160″ (4.06mm). Cut to order. Note: lengths over 100 feet may not be one continuous piece. No refunds after order is cut.
This material was extensively tested in accordance with ASTM methods and is superior to uncoated webbing and leather in every way. Excellent for outdoor, underwater, and cold weather use. Stays flexible down to -68F below zero. On a scale of 1 to 10 (10 being the highest) this material rates a 6 for Ultraviolet light resistance, and a 8 for abrasion resistance.
This material is an excellent replacement for any 1_1/2″ wide leather strap, looks like leather but lasts much longer than leather, without any of the associated maintenance. Great for horse harnesses, halters, leads, also industrial straps, purse straps, and many other applications that could benefit from a durable, easy to clean weather resistant strap material.
Resists acids, gasoline, oil, lye / caustic soda, sea water and bleach. Can be sewn, ultrasonic welded, riveted and secured with screws, nuts and washers.
We also Have: