250 weight (22mm = 7/8″ inch width)
7/8″ Rubber Duc™ Webbing Bumpy Grip 250 weight
Roll Size:33 Yds.Model #: W30A-PUPT-RDBG-0866-ZS
Priced as low as... $4.35 Yard
Base Shipping Weight: 0.11 lbs. / Yard
This 7/8″ Rubberized webbing is encased in a very heavy 1/4″ coating of specially formulated, highly flexible PVC that has a soft, rubberlike feel to it. Sports an aggressive bumpy grip pattern molded onto both sides of the material. Provides a high degree of non slip capability even in wet conditions. Great for SCUBA equipment, swim accessories and grip straps for use in marine environments. Excellent for constant outdoor use, highly resistant to sunlight and saltwater.
Inside the rubber jacket is a durable Polyethylene webbing with a breaking strength of 1,000 lbs. Overall thickness of the 250 weight is 0.250″ (6.35mm).Cut to order. Note: lengths over 100 feet may not be one continuous piece. No refunds after order is cut.
This material was extensively tested in accordance with ASTM methods and is superior to uncoated webbing and leather in every way. Excellent for outdoor, underwater, and cold weather use. Stays flexible down to -68F below zero. On a scale of 1 to 10 (10 being the highest) this material rates a 9 for Ultraviolet light resistance, and a 3 for abrasion resistance. Sometimes called clear plastic coated webbing or rubber webbing because of it's flex characteristics.
Resists acids, gasoline, oil, lye / caustic soda, sea water and chlorine bleach. Can be sewn, ultrasonic welded, riveted and secured with screws, nuts and washers.