Note: Luggage Zippers do NOT have end stops as they are intended to be sewn into luggage
It would be advisable to order a zipper a few inches longer than the zipper length that you actually need. Zipper chain can be trimmed to final length with a sharp utility knife (while laid flat on top of a piece of scrap wood), or cutting pliers or sheet metal shears.
It would also be advisable to leave the sliders on the zipper chain before trimming, as it may be difficult to put them back on the zipper chain if the teeth at the end of the zipper chain are damaged during cutting.
The Vislon® Sport Zipper is made for Rugged, Real World situations where only the tough survive. The coarse teeth on these zippers are molded of Delrin® high strength plastic. These specially designed teeth were made to resist jamming when subjected to grit and tiny debris that would easily jam other zippers.
Almost as strong as metal zippers but NO sharp edges to damage the contents of luggage. Sliders we carry for these zippers are of the Locking variety. Locking sliders will not work themselves open like non-locking sliders. The pull tab on the slider must be physically pulled; in order to release the spring loaded lock that prevents the slider from moving.
Double Pull Sliders are available with this zipper size. Double Pull Sliders have a pull on the front and on the back and are typically used for the doors and windows of tents and other textile or vinyl enclosures so that the opening can be opened and closed from either the inside of the structure or the outside.
Build-a-Zipper™ products are custom made to customer specifications and are non returnable after ordered.
Old Model Numbers:
Double Sliders #ZVS008D
We also Have: